AIO Toothpick F405 2-4S FC 20A (BLHELI_32) V4

Jesteśmy dostępni na FB Przerwa techniczna.

AIO Toothpick F405 2-4S FC 20A (BLHELI_32) V4

389,00 zł

SKU: 01040008_2 Categories: , ,

Description

The new ultralight Toothpick F405 2-4S AIO 20A FC is finally released! Compared with the V3 version, the new V4 board updates the F411 chip to F405. It can handle 20A of continuous current and up to 4S! Strong performance lets you break through the limits of your quad and explore more possibilities in the flight. Highly recommend using it on Beta95X V3 and Beta95X V3 HD Digital VTX to get a smooth flight.

Know More About BMI270

BMI270 gyro works great in most cases, especially in low frequency. But it will need more software filters and is sensitive in high frequency. This can be solved by adjusting filter settings in PID tuning. You can flash our CLI file or set gyro lowpass 2 at 135Hz and choose filter type at PT2 in settings. This will help BMI270 gyro to get a similar performance as MPU6000 gyro. Below pictures show the difference between the two gyros.

 

Comparison of Toothpick 12A AIO FC, Toothpick 20A AIO FC and Toothpick F405 20A AIO FC V4

Specifications of FC

  • CPU: STM32F405RGT6
  • Six-Axis: BMI270
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Batefight-BETAFPV405-4.2.X
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
  • Connecter: XT30, it also can be changed to XT60 if pilots need it.
  • Weight: 5.76g

Specifications of ESC

  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Input voltage: 2S-4S Lipo
  • Continuous current: 20A
  • Peak current: 22A
  • Firmware: BLHELI-32

Please Note: The chip of F405 V4 flight controller's ESC has changed to AT32F415 from STM32F105 due to shortage. While the AT32F415 is applicable to the ESC firmware version BETAFPV_20A_AT32.

 

Diagram for Toothpick F405 20A AIO FC V4

Status LED

There are 2 LEDs on the bottom of the board to indicate the status, including the Power LED ( Red), FC LED(Blue).

Light status Status Description
Power LED ( Red) Solid Power on
FC LED ( Blue ) Solid Motor Armed

How to Connect the External Rx to Toothpick F405 20A AIO FC V4

The new AIO board has integrated the Plug & Play Port for the external Rx, and there will be a 4-Pin connector for Rx in the package. Thus, we highly recommend pilots to use pin-connect to save the solder work.

Package:

  • 1 * Toothpick F405 20A AIO FC V4
  • 1 * Cable Pigtail (XT30)
  • 4 * M2x10mm screws
  • 4 * M2 nuts
  • 4 * Anti-vibration rubber dampers
  • 4 * Motor Pluggable Pins
  • 1 * 6-Pin Connector for Digital VTX
  • 1 * 4-Pin Connector for Rx

Related products